Tungsten carbide choke trim can extend service life where high-velocity fluids, sand, flashing, or severe pressure reduction erode conventional trim. This guide explains selection, specification, inspection, and RFQ requirements.
Tungsten Carbide Choke Trim: Preventing Valve Erosion Lanjutkan Membaca »
Learn when to specify a single flow valve instead of a standard check valve in a high-pressure line. Compare applications, pressure ratings, materials, testing, installation risks, and RFQ requirements.
Single Flow Valve vs Standard Check Valves in High-Pressure Lines Lanjutkan Membaca »
Learn how PSL 3 and PSL 3G affect high-pressure gate valve testing, material traceability, gas leakage checks, documentation, and procurement. Use the included comparison table and RFQ checklist to review supplier proposals.
PSL 3 and PSL 3G Testing Procedures for High-Pressure Gate Valves Lanjutkan Membaca »
API 6A stem sealing must control external leakage while tolerating sour media, high pressure, temperature changes, and repeated operation. This guide helps buyers compare seal designs, materials, testing expectations, and RFQ details.
API 6A Stem Sealing for Sour Service Valves: A Buyer’s Selection Guide Lanjutkan Membaca »
Learn how flapper and piston check valve designs respond to pulsating oilfield flows. Use the comparison and RFQ checklist to specify pressure, materials, sealing, testing, and installation requirements.
API 6A Check Valve Flapper/Piston Design for Pulsating Flows Lanjutkan Membaca »
This guide explains how to specify an HPHT wellhead valve for severe pressure, temperature, corrosion, and operating conditions. It includes a selection table, standards cautions, testing requirements, and an RFQ checklist.
HPHT Wellhead Valve Selection for High-Pressure, High-Temperature Service Lanjutkan Membaca »
