Welded Globe Valve
Nominal diameter:1/2”-16”(DN15-DN400)
Nominal pressure:Class150-Class2500(1.0MPa-320MPa)
Maximum operating temperature:425℃
Shell material:WCB,WCC,CF8,CF3,CF3M,CW6MC,CY40,M35-1,A105,F304,F316,F316L,N06625,N10276,CF8M,Monel K500,Inconel 718
Design Standards:API 602,MSS SO-80,GB/T12235,EN 13709,DIN 3356,JIS B2073
Connection: welding
Drive mode: Manual, Electric, Pneumatic, Hydraulic
Welded Globe Valve
Product Definition & Safety Mission:
The Welded Globe Valve is a core component in high-temperature, high-pressure pipeline systems, enabling permanent sealing and precise regulation. It eliminates the leakage risks and maintenance challenges associated with traditional flange connections under extreme conditions. This fully welded gate valve, through its permanent welded connection and optimized flow path design, provides a lifetime maintenance-free regulation solution for critical installations in power plants, petrochemical plants, and other industries.
JH Welded Globe Technology Core
- All-welded structure → Leakage risk approaches zero (based on welding procedure qualification)
- High pressure regulation → Pressure rating Class 800-2500 (ASME B16.34)
- Low flow resistance design → Flow resistance coefficient ≤ 0.8 (ISA 75.01)
- Ultra-long lifespan → Mechanical life ≥ 100,000 cycles (ISO 5208)
- Product Technical Analysis
- Butt Weld(BW)
- Socket Weld(SW)
Welded Globe Valve Product Technical Analysis: This industrial-grade welded gate valve is based on the concepts of permanent connection and precise adjustment. The valve body is integrally forged from ASTM A182 F316 steel and permanently connected to the pipeline through automated welding processes. The flow channel system employs a Venturi-optimized design, ensuring adjustable characteristics while controlling the flow resistance coefficient to ≤0.8. The sealing system is equipped with a Stellite 6 hard alloy sealing surface, maintaining a hardness of ≥55HRC even at 650℃. The guide mechanism uses a double guide sleeve precision fit, ensuring the valve stem maintains a movement accuracy of ±0.05mm after 100,000 adjustments.
The Butt Welds form a full penetration strength connection, providing reliable performance for large-diameter main pipeline systems with a lifespan equivalent to that of the pipelines, and meeting the requirements for long-term operation.
Core Design:
▌ Equal strength design → Weld coefficient = 1.0 (ASME B31.3) | Pressure capacity matched to piping
▌ Full penetration welding → Groove angle 37.5°±1° (ASME B16.25) | Blunt edge thickness 1.6±0.05mm
▌ Non-destructive testing → 100% X-ray + ultrasonic testing (ASTM E94/E114) | Defect rate ≤0.005%
▌ Stress relief → Post-weld heat treatment (API 6D) | Residual stress ≤ 80MPa
Socket Welding forms a fillet weld structure, providing a compact high-pressure solution for instrument pipelines and sampling systems, and completely eliminating connection leakage problems in small-diameter high-pressure pipeline applications.
Core Design:
▌ Fillet weld optimization → Weld height ≥ 1.2 times pipe wall thickness (ASME B16.11) | Weld deformation ≤ 0.1mm
▌ Compact flow channel → Flow channel diameter deviation ≤0.3% (ISA 75.01) | 40% weight reduction
▌ High pressure adaptability → Minimum wall thickness ≥ 8mm (ASME B16.34) | Pressure safety factor ≥ 5
▌ Precision alignment → Socket depth tolerance ±0.3mm (GB/T 14383) | Prevent welding misalignment
Core Design & Advantages
- Permanent Sealed Connection: The Welded Globe Valve features an all-welded structure → Leakage risk approaches zero | Eliminates connection leaks and achieves a lifetime seal.
- High-pressure precision regulation: Venturi flow channel with balanced valve disc → adjustable ratio 25:1 (IEC 60534) | regulation accuracy ±1%, meeting precision control requirements.
- Equal strength safety: Full penetration weld for butt welds → Weld coefficient = 1.0 (ASME B31.3) | Pressure-matched piping, exceeding pressure limits.
- Compact and efficient: Socket welding structure optimizes space utilization → Installation length reduced by 45% | Overcoming space limitations and expanding high-voltage applications
- High-Temperature Stability: Special materials and heat treatment processes → Temperature resistance up to 650℃ (ASME B16.34) | Prevents thermal deformation and ensures high-temperature sealing.
- Lifetime maintenance-free: Fully welded + hard sealing surface → Design life ≥ 30 years | Maintenance costs reduced to zero, completely eliminating the burden of maintenance.
Other Products
FAQ-Welded Globe Valve
The Welded Globe Valve is permanently connected to the pipeline via welding, offering the highest level of sealing integrity and structural strength. It is specifically designed for severe service applications demanding zero leakage, such as high temperature, high pressure, and hazardous or flammable media, commonly found in critical piping systems for power generation, petrochemical, and nuclear industries.
These are the two main welding types, selected based on application needs:
Socket Weld (SW):
Features: The pipe is inserted into the socket of the valve and fillet-welded around the hub. Easier installation than butt weld, with slightly lower welder skill requirements.
Application: Typically used for small bore lines (DN≤50), suitable for high pressure where radiographic testing is not required.
Butt Weld (BW):
Features: The valve and pipe are butt-ended together with prepared bevels and welded. Offers the highest connection strength, minimal flow restriction, and allows for non-destructive examination.
Application: Suitable for all sizes, especially large bore lines, high fatigue services, and all critical projects requiring radiography or ultrasonic testing.
The butt weld connection provides structural strength and fatigue life equivalent to the pipe itself. Its smooth weld transition minimizes flow resistance, turbulence, and stress concentration points. This makes the Butt Weld Globe Valve the preferred choice for main pipeline systems with high temperature, high pressure, and thermal cycling, offering superior safety and service life.
Our Welded Globe Valves are manufactured in strict compliance with international codes and hold major certifications including API, ISO, CE, ABS, BV, and CCS. These certifications guarantee excellence in material, design, manufacturing, and testing, meeting the procurement requirements of global projects.
When installing a socket weld valve, it is critical to:
Provide Gap Allowance: A fundamental gap (approx. 1.6mm) must be maintained between the pipe end and the socket shoulder to prevent high stress from weld shrinkage.
Ensure Proper Alignment: Ensure the pipe is concentric with the valve socket to avoid misalignment.
Perform Post-Weld Treatment: Post Weld Heat Treatment (PWHT) may be necessary to relieve residual stresses after welding.
Yes, due to the permanent connection, maintenance and disassembly are more complex than with flanged valves. It requires cutting the pipe and re-welding to remove the valve. Therefore, it is best suited for pipe sections intended for long-term, stable operation without frequent disassembly. System design often includes flanged joints elsewhere for isolation purposes.
Material selection is crucial in corrosive environments like acidic service. Beyond standard stainless steels (e.g., 316/316L), more advanced materials like Duplex Steel, Monel, or Inconel may be required based on the specific corrosiveness of the media. Our technical team can provide professional material selection advice.
To ensure the valve is ready for correct welding, please specify:
Weld End Type: Clearly state Socket Weld (SW) or Butt Weld (BW).
Relevant Standard & Size: e.g., conforming to ASME B16.11 (Socket Weld) or B16.25 (Butt Weld bevel), along with the pipe schedule (SCH).
Material Requirement: Body material must be compatible with the piping material to ensure weld quality.

