High Temperature & High Pressure Butterfly Valve
Nominal diameter:2”-200’’(DN50-DN5000)
Nominal pressure:Class150-Class2500(1.0MPa-250MPa)
Maximum operating temperature:425℃
Shell material:WCB,WCC,A105,F304,F316,F316L,N06625,CF8,CF3,CF3M,CW6MC,CY40,M35-1,Inconel 718,N10276,CF8M,Monel K500
Design Standards:API 609,AWWA V504,GB/T 12238,EN 593,DIN 3354,JIS B2034
Connection:Clamping, Flange, Welding
Drive mode:Manual, Electric, Pneumatic, Hydraulic
High Temperature and High Pressure Butterfly Valve
Product Definition & Safety Mission:
The High Temperature & High Pressure Butterfly Valve is a core piece of equipment in the field of extreme operating condition fluid control, specifically designed to eliminate the pain points of internal leakage, jamming, and structural failure in systems such as supercritical power plants, high-temperature pyrolysis, and high-pressure transportation. This high-temperature and high-pressure butterfly valve overcomes the reliability problems of traditional valves under extreme parameters, providing absolutely reliable shut-off protection in operating conditions of 800℃ high temperature and Class 1500 high pressure.
JH High Performance Technology Core
- Ultra-rigid creep resistance: high temperature yield strength of valve body bearing parts ≥ 220MPa (ASME BPVC Section II)
- Metal sealing system: up to 800°C (ASTM E147 standard)
- High pressure balance structure: Maximum nominal pressure PN250 (ASME Class 1500)
- Zero leakage guarantee in the hot state: The sealing level reaches API 598 zero leakage at 650°C
- Product Technical Analysis
- Ultra-High Temperature
- Ultra-High Pressure
The superior performance of the JH High Temperature & High Pressure Butterfly Valve stems from innovative extreme-condition technology: Zero-leakage protection under hot conditions is achieved through a metal sealing ring and flexible graphite composite structure, maintaining an ANSI Class V zero-leakage rating at 650°C and a pressure difference of 42MPa; the anti-creep design utilizes a chromium-molybdenum-vanadium alloy steel valve body, achieving a creep strength ≥150MPa at 600°C; high-pressure adaptive design, achieved through a tapered sealing pair, automatically increases the sealing specific pressure with the medium pressure; and intelligent thermal management integrates a temperature-torque adaptive system to compensate for torque changes caused by thermal expansion in real time. This comprehensive technological system enables the high-temperature, high-pressure butterfly valve to exhibit exceptional reliability under extreme parameter conditions.
Designed specifically for sealing failure caused by thermal deformation in ultra-high temperature media (800℃), molten salt systems/pyrolysis furnace applications, and specialty alloy solutions.
Core Design:
▌ High-temperature alloy valve body → ASTM A351 HK40 material | Overcoming the problem of oxidation and spalling at 900℃
▌ Flexible Graphite Sealing System → Sealing ring density ≥ 1.8 g/cm³ (ASTM C709) | Remains elastic after 800°C thermal cycling
▌ Water-cooled valve shaft structure → Shaft sleeve cooling water flow rate ≥ 5L/min (ASME B31.1) | To prevent transmission components from seizing due to high temperature
▌ Thermal expansion adaptive design → Sealing pressure thermal compensation rate ≥85% | Eliminates abnormal thermal opening and closing torque
Designed specifically to address the pain point of plastic deformation of sealing surfaces under ultra-high pressure conditions above Class 1500/350MPa, forging steel structure solutions for hydrogenation units/supercritical pipelines.
Core Design:
▌ Forged valve body structure → ASTM A182 F91 forging (resistant to hydrogen-induced cracking) | Pressure capacity up to PN420
▌Dual explosion-proof structure → Valve stem anti-blowout mechanism certified by API 607 | Eliminates safety risks associated with pressure transients
▌ Equal strength flow channel design → Wall thickness deviation ≤ ±1.5mm (ASME B16.34) | Avoid high pressure stress concentration
▌ Ultra-precision sealing surface → Surface roughness Ra≤0.4μm (ISO 4287) | Achieving zero leakage under a pressure difference of 350MPa
Core Design & Advantages
- Zero Leakage Guarantee under Hot Conditions: This High Temperature & High Pressure Butterfly Valve features a metal-sealed composite structure → maintaining ANSI Class V zero leakage at 650℃ | ISO 5208 certified.
- Thermal creep resistant design: This high-temperature and high-pressure butterfly valve is equipped with a chromium-molybdenum-vanadium alloy steel valve body → creep strength at 600℃ ≥150MPa | design life ≥100,000 hours
- High Pressure Adaptability: The JHHigh Temperature & High Pressure Butterfly Valve adopts a tapered seal design → PN250 torque deviation ≤ ±8% | Compliant with ISO 5211 standard
- Intelligent Thermal Management: This high-temperature, high-pressure butterfly valve integrates a temperature-torque adaptive system → compensation accuracy ±5% | eliminating high-temperature jamming.
- Material Reliability: This High Temperature & High Pressure Butterfly Valve bearing component undergoes comprehensive testing → 100% ultrasonic testing + high-temperature tensile testing | eliminating the risk of material defects.
- Comprehensive Operating Condition Coverage: This high-temperature and high-pressure butterfly valve product series covers a wide range of conditions → Temperature -196℃~800℃, Pressure Class150-Class1500 | Providing one-stop solutions
Other Products
FAQ-High Temperature & High Pressure Butterfly Valve
High Temperature & High Pressure Butterfly Valves are specifically designed for extremely demanding conditions, widely used in power plant main steam systems, petrochemical catalytic units, high-temperature oil and gas transmission, high-temperature metallurgical media, and nuclear power systems. They can withstand temperatures up to +800°C and pressures up to Class 2500 in harsh environments.
High Temperature & High Pressure Butterfly Valves incorporate multiple special designs:
Heat-Resistant Materials: Body made of chrome-molybdenum steel or stainless steel, disc selected from high-temperature alloys
Thermal Compensation Structure: Special structural design compensates for thermal expansion deformation
Enhanced Sealing: Uses metal hard seals or composite sealing systems
Heat Dissipation Design: Optimized heat dissipation structure prevents heat accumulation
Special Bearings: High-temperature dedicated bearings ensure operational flexibility
The following parameters require special attention during selection:
Temperature Pressure: Maximum working temperature and pressure fluctuation range
Thermal Cycling: Expected number of thermal cycles and temperature change rate
Medium Characteristics: Medium corrosiveness, oxidation, and particulate content
Sealing Class: Required sealing standard grade
Material Requirements: Special material certifications and heat treatment requirements
Special attention during installation includes:
Thermal Expansion Calculation: Precisely calculate pipeline thermal expansion and reserve gaps
Alignment Accuracy: More stringent alignment requirements at high temperatures
Bolt Selection: Use high-temperature dedicated bolts and tightening procedures
Support Design: Set up reasonable pipeline support systems
Insulation Coordination: Coordinate installation with insulation systems
We ensure sealing reliability through advanced technologies:
Metal Sealing: Uses special alloy sealing surfaces
Elastic Design: Sealing system with thermal compensation capability
Surface Treatment: Sealing surfaces treated with ultra-hard coatings
Precision Machining: CNC machining ensures sealing surface accuracy
Condition Testing: Testing under actual operating condition parameters
Our High Temperature & High Pressure Butterfly Valves support a complete certification system including CE, ISO 9001, API 609, ABS (American Bureau of Shipping), BV (Bureau Veritas), CCS (China Classification Society), nuclear certifications, and ASME nuclear stamps.
We guarantee service life through multiple measures:
Material Verification: All materials pass high-temperature performance tests
Fatigue Analysis: Detailed thermal fatigue life analysis conducted
Structural Optimization: Optimized structure reduces thermal stress concentration
Process Control: Strict control of manufacturing and heat treatment processes
Cycle Testing: Thermal cycle testing simulating operating conditions
We provide deep customization services and can customize ultra-high temperature versions (up to +1000°C), ultra-high pressure versions, hydrogen attack resistant versions, nuclear-grade valves, and special products complying with specific industry standards according to customer requirements.




